Intex Sand Filter Pump and Saltwater System: A Comprehensive Guide
Intex introduces innovative Hydro Aeration Technology and Krystal Clear Saltwater Systems, offering a comprehensive manual for optimal pool sanitation and enjoyment.
Understanding the Intex Sand Filter Pump
The Sand Filter Pump, paired with a Saltwater System utilizing E.C.O. (Electrocatalytic Oxidation), provides efficient pool filtration and sanitation. This system removes suspended particles, though it doesn’t sanitize independently. Crucially, the strainer grid prevents damage by blocking large objects.
For inflatable pools, install the strainer, nozzle, and plunger valve before inflating the liner. Remember, part numbers refer to the Parts List section within this manual. Proper assembly, following included instructions, is vital for optimal performance and longevity of your Intex system.
Sand Filter Pump Functionality
The core function of the Intex Sand Filter Pump is to remove debris and suspended particles from your pool water, ensuring clarity. However, it’s essential to understand this pump doesn’t independently sanitize the water; a separate sanitation system is required.
The integrated strainer grid plays a critical role, preventing larger objects from entering and potentially damaging the pump’s internal components. This proactive protection extends the lifespan and efficiency of your filtration system, contributing to a cleaner, healthier pool environment.
Setting Up Your Intex Saltwater System
Proper setup of your Intex Saltwater System is crucial for effective pool sanitation. Begin by unpacking the system and its accessories, then strategically position it after the filter pump in your pool’s circulation line.
Connect the provided connector hose to the system’s inlet, ensuring a secure fit. Remember, the saltwater system relies on pre-filtered water from the sand filter to operate optimally, delivering consistently clean and refreshing pool water for a superior swimming experience.
Saltwater System Placement & Connections
Place the Saltwater System in line following the filter pump, ensuring correct water flow direction. Connect the connector hose (7) securely to the system’s inlet for a watertight seal. Proper placement is vital for efficient operation and longevity.
Verify all connections are tight to prevent leaks and maintain optimal system performance. The system transforms salt into chlorine, providing a gentler, more natural sanitizing experience for your pool, enhancing water quality and swimmer comfort.
Component Identification & Parts List
This section details the essential components of the Sand Filter Pump & Saltwater System (ECO20110-1 & 15110-1). Refer to the detailed Parts List within this manual for visual identification of each part number. Understanding these components is crucial for proper assembly, maintenance, and troubleshooting.
The strainer grid prevents debris from damaging the pump, while the filter itself removes suspended particles. Remember, the sand filter sanitizes, ensuring a clean and healthy swimming environment for you and your family.
Identifying Key Components (ECO20110-1 & 15110-1)
The ECO20110-1 and 15110-1 models feature a strainer grid, preventing large objects from damaging the pump. Key parts include the nozzle and plunger valve – install these before inflating an inflatable top ring pool. Part numbers referenced throughout this manual correspond directly to the illustrated Parts List.
Familiarize yourself with these components for efficient setup and maintenance. Proper identification ensures correct installation and facilitates troubleshooting when needed, maximizing your pool experience.
Installation Procedures: Step-by-Step
Begin by assembling your above-ground pool (AGP) and its filter pump, strictly following their respective installation instructions. Unpack the Saltwater System and its accessories carefully. Position the Saltwater System after the filter pump in the water flow line.
Connect connector hose (7) to the Saltwater System inlet; Ensure all connections are secure to prevent leaks. Remember, the sand filter sanitizes, but doesn’t fully clean the pool.
Above-Ground Pool (AGP) Integration
Assemble the above-ground pool and its filter pump according to their individual installation instructions before proceeding. If your pool features an inflatable top ring, install the strainer, nozzle, and plunger valve before inflating the liner. This prevents damage during setup.
Remember part numbers refer to the Parts List section within this manual. Proper AGP integration is crucial for efficient filtration and saltwater system operation, ensuring a clean and enjoyable swimming experience.
Maintaining Your Sand Filter
The strainer grid is vital for preventing large objects from damaging the filter pump. Regular cleaning is essential for optimal performance. Remember, the sand filter effectively removes suspended particles, but it does not sanitize the pool water itself.
Consistent maintenance ensures longevity and efficiency. Inspect and clean the strainer grid frequently to maintain proper water flow and filtration, contributing to a healthier and more enjoyable pool environment.
Strainer Grid Maintenance & Cleaning
The strainer grid prevents debris from reaching and potentially damaging the filter pump. For pools with inflatable top rings, install the strainer, nozzle, and plunger valve before inflation. Follow the installation instructions carefully, referencing the parts list within this manual for accurate component identification.
Regularly inspect and clean the strainer grid to ensure efficient filtration and prevent reduced water flow. A clean grid maximizes the system’s performance and extends its lifespan.
Saltwater System Operation & Monitoring
Intex Krystal Clear Saltwater Pool Chlorine Systems utilize E.C.O. (Electrocatalytic Oxidation) technology for a gentler, more natural sanitizing experience. This innovative system converts salt into chlorine, reducing harsh chemicals and skin irritation. Proper operation requires understanding the system’s components and monitoring its performance regularly.
Ensure the saltwater system is correctly positioned after the filter pump in the water circulation pathway for optimal functionality and chlorine generation.
Understanding E.C.O. (Electrocatalytic Oxidation) Technology
Intex’s E.C.O. technology represents a significant advancement in pool sanitation. This process utilizes an electrolytic cell to convert dissolved salt (sodium chloride) into chlorine gas. The chlorine then dissolves in the water, providing effective disinfection while minimizing the typical chlorine odor and irritation.
E.C.O. offers a more consistent and comfortable swimming experience, reducing reliance on traditional chlorine tablets or liquid chlorine, and promoting healthier water quality.
Troubleshooting Common Issues
If the pump fails to start, verify the power supply and check for tripped circuit breakers. A low flow rate could indicate a clogged strainer basket or filter. Regularly inspect and clean the strainer grid to prevent obstructions. Ensure proper water levels are maintained for optimal pump performance.
Addressing these issues promptly will ensure consistent and efficient operation of your Intex sand filter and saltwater system, maximizing your pool enjoyment.
Pump Not Starting/Low Flow Rate
A pump that won’t start often stems from power issues – confirm the connection and check for tripped breakers. Low flow can signal a clogged strainer basket, hindering water intake. Inspect the strainer grid frequently, removing debris to maintain optimal flow. Verify adequate water levels, as insufficient water prevents proper pump operation.
Remember, a clean system ensures efficient filtration and a sparkling pool!
Water Chemistry & Salt Levels
Maintaining optimal salt concentration is crucial for your Intex saltwater system’s effectiveness. Regularly test salt levels using a reliable testing kit, aiming for the manufacturer’s recommended range. Proper pH balance (7.2-7.8) and alkalinity are also vital for efficient chlorine generation and water clarity.
Consistent monitoring prevents scaling, corrosion, and ensures a safe, enjoyable swimming experience. Adjust levels as needed, following product instructions carefully.
Maintaining Optimal Salt Concentration
Achieving and sustaining the correct salt level—typically between 2700-3900 ppm—is paramount for your Intex saltwater system. Regularly test your pool water using a salt test strip or digital meter. Add pool salt gradually, following the system’s guidelines, to reach the desired concentration.
Avoid over-salting, as it can damage the cell. Consistent monitoring ensures efficient chlorine production and protects your investment, providing a consistently sanitized pool;
Winterizing Your System
Preparing your Intex sand filter pump and saltwater system for colder temperatures is crucial. First, thoroughly clean the sand filter, backwashing until water runs clear. Drain all water from the pump, filter, and saltwater system components to prevent freezing damage.
Disconnect and store the system indoors in a dry location. Consider using antifreeze in the plumbing lines for added protection against potential freezing. Proper winterization extends the lifespan of your equipment.
Preparing the Pump and Saltwater System for Cold Weather
Before freezing temperatures arrive, disconnect the pump and saltwater system from all plumbing. Completely drain all water from both units – the pump housing, filter tank, and saltwater cell. Store these components indoors, ideally in a dry, protected area, away from potential moisture and extreme cold.
Consider adding RV antifreeze to the plumbing lines to displace any remaining water, offering extra protection against cracking or damage during the winter months.
Safety Precautions & Warnings
Prioritize safety by diligently reading the instruction manual before operating the Intex sand filter pump and saltwater system. Practice good safety habits, establish clear pool rules, and ensure vigilant adult supervision at all times. Accidents are preventable with careful attention to detail.
Never operate the system with damaged cords or plugs, and always disconnect power before performing any maintenance. Avoid any modifications to the system, as this could void the warranty and create a safety hazard.
General Safety Guidelines for Pool Systems
To minimize injury risk, consistently practice good safety habits and enforce strict pool rules. Thoroughly review this manual and all accompanying documentation before installation and operation. Vigilant supervision is crucial, preventing unsupervised access, especially for children.
Ensure proper grounding and electrical connections. Never operate damaged equipment. Regularly inspect the system for leaks or malfunctions. Prioritize safety to ensure a fun and secure pool experience for your family.
Warranty Information
Intex offers a 2-year warranty on the Sand Filter Pump itself, covering manufacturing defects. Hoses, plunger valves, and fittings are covered for 180 days against similar defects. This warranty doesn’t cover damage from misuse, improper installation, or acts of nature.
To claim warranty service, contact the appropriate Intex Service Center detailed within this manual. Proof of purchase is required for all claims. Retain your receipt to facilitate a smooth warranty process.
Sand Filter Pump & Accessory Warranty Details
The Sand Filter Pump (Model ECO20110-1 & 15110-1) is warranted for two years against manufacturing defects from the date of purchase. Accessories, including hoses, plunger valves, and fittings, have a 180-day limited warranty.
This warranty excludes damage resulting from improper use, negligence, unauthorized modifications, or failure to follow operating instructions. Contact Intex Service for assistance and retain proof of purchase for all claims.
Filter Backwashing Procedures
Regular backwashing is crucial for maintaining optimal sand filter performance. Backwash when the filter pressure increases by 8-10 PSI above the clean starting pressure, or approximately every 3-5 weeks.
Turn off the pump, set the multiport valve to “Backwash,” and operate for 2-3 minutes until the water in the sight glass clears. Then, set the valve to “Rinse” for 30-60 seconds before returning to “Filter.”
When and How to Backwash the Sand Filter
Backwash the sand filter when the pressure gauge reads 8-10 PSI higher than the clean, starting pressure. Typically, this occurs every 3-5 weeks, depending on pool usage and environmental factors.
To backwash, turn off the pump. Set the multiport valve to “Backwash” and run for 2-3 minutes until the sight glass clears. Then, switch to “Rinse” for 30-60 seconds before returning to the “Filter” setting, and restart the pump;
Understanding Error Codes (If Applicable)
While specific error codes aren’t detailed in the provided excerpts, diligent monitoring of the system is crucial. Any unusual behavior, like inconsistent salt levels or a lack of chlorine production, warrants investigation.
Refer to the complete Intex manual for a comprehensive list of potential error messages and their corresponding solutions. Contact Intex Service Center if issues persist, ensuring a safe and properly functioning saltwater system for your pool.
Decoding System Error Messages
Unfortunately, the provided text doesn’t contain specific Intex sand filter pump and saltwater system error codes. However, a fully functional system relies on understanding potential issues. Regularly check for unusual indicators, such as fluctuating salt concentrations or diminished sanitization.
Consult the complete Intex manual for a detailed error code list and troubleshooting steps. Promptly addressing any alerts ensures optimal performance and extends the lifespan of your pool equipment.
Intex Product Range & Resources
Intex offers a diverse range of products beyond sand filter pumps and saltwater systems, including various pools, inflatable pools, and convenient pool accessories. Explore in-home toys, comfortable airbeds, and durable boats, all designed with quality and recreation in mind.
For further information, visit the official Intex website or consult fine retailers. Discover comprehensive resources, including detailed product specifications, helpful guides, and dedicated customer support to enhance your pool experience.
Exploring Other Intex Pool Products
Intex’s extensive catalog features a wide array of pool options, from easy-set inflatable pools perfect for quick fun to larger, more robust frame pools designed for lasting enjoyment. Complement your system with Intex’s selection of pool accessories, enhancing both convenience and safety.
Discover comfortable airbeds and durable boats for additional recreational opportunities. Intex consistently delivers quality products available at numerous retailers and directly through their website, ensuring a complete outdoor experience.